TU Berlin

Chair of Chemical & Process EngineeringDr.-Ing. Jörn Villwock

Ein rotes Dreieck, darunter drei orangen senkrechten Balken als Symbol für Fakultät 3. Das Symbol befindet sich innerhalb  des kreisförmigen Schriftzuges: Prozesswissenschaften.

Page Content

to Navigation

Dr.-Ing. Jörn Villwock

Lupe

Email


Research
From single particles to dispersion – Scale up phenomena in multiphase systems

Current research project
Batch phase separation of twphase liquid-liquid systems in stirred vessels (AiF/GVT project)

Finished project
Coalescence efficiency in binary systems (DFG project)

Teaching
Membranverfahren

Bachelor's / Master's Theses

Current offers for theses can be found here.

Motivation

In many industrial applications, processes are operated discontinuously. Examples are two-phase reactions in stirred tanks or liquid-liquid extractions, where it is often necessary to separate the two phases before further processing. Insufficient methods exist for the design and optimization of this separation step, especially for the scale-up from laboratory to technical scale. In particular, the prediction of the drop size distribution in the technical apparatus and, derived from this, the interfacial area in the dispersed state as well as the phase separation behavior has not been possible with certainty to date on the basis of laboratory tests. This means that optimum apparatus dimensioning and operational management cannot be guaranteed.

Approach

In the project, a scale-up methodology is developed specifically for stirred liquid/liquid systems. For this purpose, experimental investigations will be carried out on three different size scales (1 L, 30 L and 500 L). Industrially relevant stock systems (toluene/water, butyl acetate/water and kerosene oil/water) are used, important operating parameters such as dispersed phase fraction, power input, mixing time and stirrer geometry are varied and dispersion and phase separation behavior are analyzed in detail. The model developed based on the results at the 1L scale will be validated and adapted at the other two scales. Thus, a standardized, cross-scale design methodology will ultimately be developed. The basic scheme of the project is shown in Figure 1.

Figure 1: Work steps for the development of the scale-up methodology
Lupe
Lupe

Navigation

Quick Access

Schnellnavigation zur Seite über Nummerneingabe